THE TECHNOLOGY PROVIDES: Proven reliability Precise lighting control PWM battery charging FOUR VERSIONS AVAILABLE: 12 Volt: 5 and 10 amp ratings 24 Volt: 5 and 10 amp ratings
OPERATIONS: Digital LED display shows the 16 lighting options(by switch with 5 seconds ) Number display, from 0 to 7, DC output for load 1. Number display, from 0. to 7. DC output for load 2. Digital LED stop flash to confirm correct switch selection. 10 minutes delay to make sure its real dark.
FEATURES:
Microcontroller digital accuracy Fully automatic operation 16 field adjustable lighting control options Manual test capability Detects day and night using the PV array Suitable for all 12/24 Vdc lamps Suitable for Seal lead acid battery Temperature compensation
TECHNICAL INFORMATION 12Volt 24Volt Rated solar input 5/10A 5/10A Rated load 5/10A 5/10A 25% Current overload 1 min. 5 min. Regulation voltage 14.4 V 28.8 V Load disconnect 11.08V 22.15 V Load reconnect 12.58V 25.10 V Temp Comp.(mV/°C) -30 -60
Type of Charging: series PWM Self-consumption: 6mA maximum 4 stages Bulk,PWM,Boost and Float Dimension: 140x90.5mm Electronic protections: short circuit and over current Terminals: for wire sizes to 2.5mm2 -solar and load Weight: 250g Reverse polarity-solar,load & battery Temperature: -35 to +55 Reverse current at night Humidity: 100% non-condensing High voltage-load Enclosure: IP22 Lightning-solar, load, battery Case: ABS Tropicalization: circuit board-conformal coated Compliance: CE world Bank Terminals-corrosion protected LED indications: Green charging Green-Yellow-Red battery levels Red low voltage warning and disconnect Green-Yellow-Red battery levels All 3 LEDs blink-to show mistakes